Battery Charger Port

Makita 18V LXT 8 Piece Tool Kit 3 x 5.0Ah Battery Twin Port Charger T4TKIT-4377

Makita 18V LXT 8 Piece Tool Kit 3 x 5.0Ah Battery Twin Port Charger T4TKIT-4377

Makita 18V LXT 8 Piece Tool Kit 3 x 5.0Ah Battery Twin Port Charger T4TKIT-4377

Makita 8 Piece Tool Kit 18V 3 x 5.0Ah Batteries & Twin Port Charger T4TKIT-4377. Makita 8 Piece Tool Kit 18V LXT 3 x 5.0Ah Batteries & Twin Port Charger T4TKIT-4377.

Enhanced dust and drip-proof performance for use in outdoor applications or harsh environments. Single sleeve keyless chuck allows for easy bit installation/removal by one hand. Twin LED Job light with pre-glow and afterglow functions. Ergonomic design for fatigue free use.

21 Torque settings in clutch mode. Electric Brake Variable speed control trigger Forward/reverse rotation Twin LED job light High rotation speed One-touch bit installation Ergonomically designed soft grip handle Compact overall length of 137mm Lightweight design Battery protection circuit Belt clip.

22 minute charge time with the air cooled Makstar Optimum Charging System. Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time. Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery.

Ergonomically rubberised handle provides comfortable gripping and more control while minimising hand fatigue and pain. The large 2 finger variable speed trigger makes this jigsaw easy to operate even with gloves on. 3 orbital settings + straight cut. Blower will clear the pencil line of dust.

Tool-less blade change - push in lock system enables very fast blade changes. LED light will illuminate your cut line.

Smooth and powerful cutting at the high stroke speed at 2,600 spm. Electric brake Variable speed control trigger Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current Forward and reverse trigger LED job light Ergonomic soft grip. Thumb On/Off switch, positioned for ease of use when holding body of machine. Hex wrench holder on body. Accessories can be installed at 30º increments, across 360º.

Capable of receiving DAB/DAB+ Radio Stations Dual power source: AC or Makita batteries. Flexible antenna can be removed and stored inside the radio. Soft grip carry handle swivels 90 degrees 2 speaker stereo system.

AUX-IN jack for connecting to external audio source Connecting cable is not included. AC adaptor jack IP64 rated dust and shower-proof construction Easy-to-read digital tuner with LCD display Compatible with all Makita 7.2V Li-ion, CXT and LXT batteries.

Tool-less blade change Trigger switch with lock-off lever Electric brake Variable speed Ergonomically designed handle Newly designed crank mechanism for higher efficiency High power. 3 x 5.0Ah BL1850 Batteries 1 x DC18RD Charger 1 x 26" Tool Bag with Wheels 1 x 22" Tool Bag. Part No: T4TKIT-4377 Barcode: 8906763542660.

Barcode: 0088381653831 Voltage - 18v Max. In wood - 65mm Max. In masonry - 16mm Max.

Barcode: 0088381699099 Battery Type: Li-ion Voltage: 18V Driving Shank: 6.35mm (1/4 Hex) Machine Screw: M4-M8 Standard Bolt: M5-M16 High Tensile Bolt: M5-M12 Coarse Thread: 22-125mm Impacts per minute: 0-3500 ipm No Load Speed: 0-2900 rpm Max Tightening Torque: 165Nm Sound Pressure: 93 dB(A) Sound Power: 104 dB(A) Sound K Factor: 3 dB(A) Vibration: 10.5 m/s² Vibration K Factor: 1.5 m/s². Barcode - 0088381662710 Voltage - 18V Max in steel - 10mm Max in wood - 135mm Strokes per Minute - 0-2600 spm Stroke Length - 26mm Noise sound pressure - 78 dB(A) Noise K factor - 3 dB(A) Vibration K factor - 1.5 m/sec² Vibration Cutting Chipboard - 8 m/sec² Vibration Cutting Sheet Metal - 3.5 m/sec². Barcode: 0088381660112 Grinding Wheel: 4-1/2" / 115mm Max Wheel Diameter: 4-1/2" 115mm No Load RPM: 10,000 Watt Hours: 54.0 Overall Length: 12-1/2. Barcode: 0088381666022 Battery Type - Lithium-ion Charging Time - 22 min Voltage - 18V Oscillation Angle - 3.2 º Oscillations per Minute - 6000 - 20000 Vibration K factor - 1.5 m/sec² Vibration: Cutting Metal - 5 m/sec² Vibration: Cutting Wood - 9.5 m/sec² Vibration: Chiselling - 7.5 m/sec² Vibration: Sanding - 2.5 m/sec². Barcode: 0088381827898 Battery Type: Lithium-ion Battery Range: 7.2 - 18V Speakers: 2x 76mmØ (8O) Practical Output (7.2v): 0.5W x 2 Practical Output (10.8v): 1.2W x 2 Practical Output (14.4v): 2.2W x 2 Practical Output (18v): 3.5W x 2 Frequency Range DAB: Band III 5A - 13F FM Coverage: 87.5 - 108 Mhz.

Barcode - 0088381806640 Battery Type - Lithium-ion Voltage - 18 V Capacity in Wood - 255 mm Capacity in Mild Steel Pipe - 130 mm Strokes per Minute - 0 - 2,800 spm Stroke Length - 32 mm Noise sound pressure - 84 dB(A) Noise sound power - 95 dB(A) Noise K factor - 3 dB(A) Vibration K factor - 1.5 m/sec² Vibration: Cutting Wood - 12.5 m/sec² Vibration: Cutting Chipboard - 13.0 m/sec². Images for illustrative purposes only - please refer to description and specification for full details of product.

Additional charges will be imposed if, weight is more than 1kg. Postcodes Details are Given Below.

HS 1-9, I 1-56, KA27-28, KW1-17, PA20-49, PA62-77, PA60-61, PA78, PH17-26, PH-30-44, PH49-50, ZE1-3, BT1-94, IM1-9, IM99, TR21-25, Isle Of Wight. If, you receive any Parcel from us that contains damaged goods, this should be notified to customer services who will arrange for collection and replacement, within the 24-48 hours period. This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Tool Sets". The seller is "tools4trade" and is located in this country: GB. This item can be shipped to United Kingdom.
  • Model: DHP458+DTD152+DGA452+DJV180+DTM50+DSS611+DJR186+DMR110
  • Battery Included: Yes
  • Power Source: Battery
  • Type: Power Tool Kit
  • Number of Tools: 8
  • MPN: DHP458Z, DTD152Z, DGA452Z, DJV180Z, DTM50Z, DSS611Z, DJR186Z, DMR110, 3xBL1850, DC18RD, Bag
  • EAN: 8906763542660
  • Number of Batteries: 3
  • Battery Technology: Lithium-Ion (Li-Ion)
  • Brand: Makita
  • Voltage: 18 V

Makita 18V LXT 8 Piece Tool Kit 3 x 5.0Ah Battery Twin Port Charger T4TKIT-4377