New MY2021 100w or 120w or 130w or 150w Solar Panel kit c/w corner brackets OR Z alloy brackets to charge 12v battery system. This is a well designed and easy to install system, 3m (or 2m for 120w panel) cables already attached to the panel + another 4m of cables give you total of over 6m to 7m distance between your panels and the battery. The 10A controller is well sized for this kit, it is important not to have an over sized controller (20A or above) as the controller is also responsible for over load protection to the cables and battery (the whole system). The 4m cable (for connecting between controller and battery) in this kit is good quality 1.5mm cross section rated at over 10A (which is needed with a 10A controller), with in line fuse to give extra protection for current over load. Large quality 30A battery clips attached for safe and easy connection to 12v battery.
New 100w, 130w and 150w 12BB high efficiency Mono solar cells 2021. Adopting the design of 12 grid lines, the Multi-busbar PV module has increased the grid line's ability to collect the electric current but also can reduce the internal damage, increase the photic area of the cell piece, shorten the conduction distance on the current fine grid and promote the output power of the module. Different from the traditional design methods, 12BB design has effectively reduced the grid line's residual stress so as to greatly reduce the probability of any hidden crack arising in the cell.Even if the unforeseen circumstance of reduced cell power caused by the hidden crack or fragment occurs, the small-interval grid line design still enables such product to continue to maintain the good performance of electricity generation. These panels are a little more. And lighter then the old less. Any questions, just send us a message. OPTIONAL extra 100w or 120w panels available for 24v systems. Only 2m cable attached to the 120w panel. NO HIDDEN COSTS such as VAT and/or import duty within the UK. Can be use for - Motorbike/Caravan/Boat/Camping/Farm/Garden Shed/Car/RV/DIY projects.
1 x 100w or 120w or 130w or 150w fully sealed Waterproof and maintenance-free class A solar panel with 3m (or 2m for 120w)cable attached (ready to connect to the charger controller) for permanent outdoor use. Whenever there's sunlight, it will silently generate free electricity for years and years. 1 x 10A LCD display 12v/24v auto charger controller (need 2 panels for 24v system) comes with a detailed English user manual. Controller (non LCD) upgrade at extra cost.1 x set of 4 PVC brackets OR set of 4 alloy Z bracket c/w stainless steel nuts and bolts (see drop down box options). 1 x 4m of cable. C/w quality fully insulated NEW large battery alligator clips and fuse. 100w 12BB Mono Solar Panel. IP65 weather proof connection box.
Maximum power voltage: 18.68V. Maximum power current: 5.35A. Open circuit voltage: 22.30V. Short circuit current: 5.63A.Tempered glass with enhanced stiffness and impact resistance. Strong anodised aluminum alloy frame. Dimensions: 109x67x3cm, 2m cable attached. Maximum power current: 6.42A.
Open circuit voltage: 22.3V. Short circuit current: 6.76A.
Works in low light, cloudy conditions and in-doors (facing the sun). High transmittance low iron tempered glass with enhanced stiffness and impact resistance. M cable attached to each panel. 130w 12BB Mono Solar Panel. Maximum power current: 6.96A.Short circuit current: 7.33A. 150w 12BB Mono Solar Panel. Maximum power voltage: 18.68v. Maximum power current: 8.03A. Open circuit voltage: 22.30v. Short circuit current: 8.45A. 10A 12v/24v Digital Charger Controller c/w 2 x 5V 3A USB output features. Compact dimensions : 13.5cm x 7cm x 3.5cm. 2 x 5V 3A USB output - will only work when connected to a 12v or 24v battery.
English instruction for the controller included. 4-stage intelligent PWM charge mode. Build-in protection for short-circuit, reverse connection, reverse charge back to the solar panel and over-load. Terminals for wire up to 6mm2.Automatic 12v/24v recognition (need 2 panels for 24v system). Working temperature: -35C to 60C.
10A 12v/24v MPPT Digital Charger Controller c/w 1 x 5V 1A USB output features. Compact dimensions : 13.5cm x 10cm x 3cm.
1 x 5V 1A USB output - will only work when connected to a 12v or 24v battery. Single chip microcomputer control real time Maximum Power Point Tracking charging.
High precision temperature & light condition compensation. Build-in protection for short-circuit, over-load, reverse connection and reverse charge back to the solar panel.
We are a bricks and mortar UK registered limited wholesale company, with over 20 years of importing experience. We have been trading from the same warehouse for more than 10 years. Solar panels are sent via Parcelforce or DX and all are recorded, tracked and insured.Solar panels are sent via Parcelforce and all are recorded, tracked and insured. This item is in the category "Home, Furniture & DIY\DIY Materials\Electrical Supplies\Alternative Energy Supplies\Solar Power Supplies\Solar Panels & Kits". The seller is "solar_wholesaler_uk" and is located in this country: GB. This item can be shipped to United Kingdom.